3" Vac Hose?

nightrider wrote: Kenny is 100% right on the money..............he knows his stuff. Try connecting a 5 or 6 inch kitchen hood ventilation pipe on your truckmount or porty...............and see what happens.................you need one hell of a blower to handle 3" or more. Maybe my 6.9 Roots can do it but only on a single wand operation.                                                     Nightrider

I will say that there is some improvement to be gained with 2.5" hose on the big blower machines like Jack has. The 68 blower he has is capable of over 700 cfm at high lift.Improve the flow by going with the bigger hose would increase suction for him, but I doubt if the wand could be used without a glide on it.

Likewise, people that have #47, #56, and #59 blowers would all see improvement in flow as well, as long as the wands had glides on them to allow flow rates to exceed 200 cfms at the WCI. My Cleanco with the 47 blower in it was able to move the cfm up from 247 cfms to 262 cfms just by changing the first 50 ft to 2.5" hose.That is running 2" hose direct connected to a titanium wand with Superglide on it.

That said, those running #3.2, #36, or #45 blowers with 1.5" tubed wands with 25 ft whip hoses will not see the 15 or more cfm increase the bigger blower units will see.

But that will not stop me from selling you this hose if you want it. I sell mine for $159US with delivery included if you live in the USA. I figure if you want to buy after I have warned you that it may not increase the performance as much as some tell you it will, is your God given right. Who am I to say no?
     

BTW, any Canadians wanting this hose in Canada can get it too, but brokerage, shipping, and exchange will push the price up to $250 Cdn plus tax(gst)
    

Edited by Superglide Ken - 13/December/2006 at 2:22pm

Splash: Our new Beastmaster portable, coming out next Spring, is equipped with the 2" hose as standard equipment cause it has 4 vacuum motors. If we advertised that the same way everyone else does by adding the 100 cfm on open flow from each motor, we would call it a 400 cfm machine. That is the strongest you can get anywhere. But if you measure it's cfm with the wand on the carpet, it will be about 100 cfm. That still is going to make it 3X more than a standard Ninja(2 -2 stages) that tests out around 30 to 35 cfms in use.That will also exceed the cfms available from most of the 3 vac motor machines being sold today as well, since none of them can get much more than 60 cfms in stock form when tested under use conditions as well.

Possible exception to this is the Scorpion, a 230 volt machine sold in the UK. In fairness to Ed Valentine, I will not include this in my preceding statement, because I have not tested it, and it may very well be more powerful than other 3 vac motor machines that are on 110 volt power. But I would say that the Beastmaster and the Scorpion will be the 2 strongest portables that money can buy next year.

Unfortunatly, the Beastmaster portable will not be sold in Canada because of the difficulty in any machine being sold that has 2 cords on it getting CSA certifation. But at least the USA market will get it.


NEW LOWER PRICED HYPER BOX COMING SOON:

There is some good news for Canadian Cleaners however.
Next year we are going to offer a vacuum booster for Ninja owners called the Hyperbox. It will take your stock machine with 2 vac motors and turn it into a 4 vac monster portable almost as powerful as the larger Beastmaster. We will do this in the USA as well after it is first offered in Canada. The first distributor to offer this will be located in the GTA. We will be selling this from our site as well.

Price will only be $599 Cdn,an unheard of price for a device that basically will come close to doubling the vacuum power of most Ninja machines, and a fraction of the price that other boosters cost.

Stay Tuned!
    
    
    
    
    
    

Edited by Superglide Ken - 14/December/2006 at 4:41pm

Nope.

All it will take to run the Beastmaster portable or the pimped Ninja machines is 2 - 15 amp circuits, as are commonly found in US cities. We also have a 230 volt Beastmaster portable for the European market as well, but that will not debut till sometime in the second half of 2007. Got to go thru the EU certification process which is not easy.
    
    

Edited by Superglide Ken - 14/December/2006 at 3:21pm

got my big boy 2" pmf wands today....BIG DIFFERENCE WOW

I got the tall boy wand....14" wide 2" of fun...

You been gaining weight. I was remembering when you said 230 lbs 2 years back.

Is it the lips I sent you that you tryed?

Did you buy from Magic Wand? If you did, you got George's Magic lip glides. They are too thick and will not fit your wand. Should have bought them from me.Mine fit that wand. If not, costs you nothing.


Now you see that there is nothing magic about them. Lots of people throw them away and buy ours cause ours are thinner and still allow air to be drawn into the wand.
    
    

Edited by Superglide Ken - 13/December/2006 at 6:07pm