Heli Coil |
Post Reply | Page 12> |
Author | |
Hammy
Carpet Cleaning Guru Joined: 27/September/2006 Location: Canada Status: Offline Points: 10330 |
Post Options
Thanks(0)
Posted: 07/April/2007 at 3:30pm |
Does anybody have experience with installing one?
|
|
Could somebody just clean my carpets!
|
|
Sponsored Links | |
cmaster
IICRC Instigator Joined: 29/January/2004 Location: Canada Status: Offline Points: 29693 |
Post Options
Thanks(0)
|
Sorry. Never done it
|
|
The STD Meter |
|
Ken Harris
Grand Potentate Joined: 12/January/2006 Location: Canada Status: Offline Points: 1120 |
Post Options
Thanks(0)
|
I have installed many. What do you need to know?
|
|
Inventor of Teflon Carpet Wand Glides.Free Glides for all Cleaners in June!
|
|
Hammy
Carpet Cleaning Guru Joined: 27/September/2006 Location: Canada Status: Offline Points: 10330 |
Post Options
Thanks(0)
|
Oil drain plug on a four wheeler.
|
|
Could somebody just clean my carpets!
|
|
Ken Harris
Grand Potentate Joined: 12/January/2006 Location: Canada Status: Offline Points: 1120 |
Post Options
Thanks(0)
|
Sorry, I thought this was carpet cleaning related. Can't help you then.
|
|
Inventor of Teflon Carpet Wand Glides.Free Glides for all Cleaners in June!
|
|
Hammy
Carpet Cleaning Guru Joined: 27/September/2006 Location: Canada Status: Offline Points: 10330 |
Post Options
Thanks(0)
|
What's the difference Kenny?? What if it was plug head for a slide in unit??
I thought maybe somebody would share their experience with me if they had used a Heli Coil before.(Kenny?) No big deal I will find the info someplace else! Worth a shot! |
|
Could somebody just clean my carpets!
|
|
Ken Harris
Grand Potentate Joined: 12/January/2006 Location: Canada Status: Offline Points: 1120 |
Post Options
Thanks(0)
|
My experience is with the smaller heli Coils(I actually install them in some of my glides). The larger ones you need for your application in the harder materials may be different. I don't want to mis-lead you Hammy.
Edited by Ken Harris - 07/April/2007 at 11:56pm |
|
Inventor of Teflon Carpet Wand Glides.Free Glides for all Cleaners in June!
|
|
Dennis Conner
SGK Basher Joined: 11/October/2004 Status: Offline Points: 640 |
Post Options
Thanks(0)
|
yet again I know more than kenni.
I've installed them on outboard motor sparkplug applications. Should be similar (about the same size in cast aluminum).
It's pretty easy. However I had removed the head from the engine, so chip contamination in the engine was eliminated. Can you remove the oilpan or is it all one piece on the case? I'd recomend doing this as you have to drill, tap and break off a small piece of the heli-coil. getting this stuff into the oilpan would not recomended.
All you do is drill the hole oversize (per instructions for the final thread size), then tap the new hole. Using the insertion tool, thread the heli-ciol into the tapped hole. Then break off the tang that you used to install the coil.
|
|
Hammy
Carpet Cleaning Guru Joined: 27/September/2006 Location: Canada Status: Offline Points: 10330 |
Post Options
Thanks(0)
|
Thanks Dennis I would not of thought about removing the oil pan!
|
|
Could somebody just clean my carpets!
|
|
Dennis Conner
SGK Basher Joined: 11/October/2004 Status: Offline Points: 640 |
Post Options
Thanks(0)
|
Glad to help. Just follow the directions on the heli-coil kit.
One other tip...be sure to use a tapping fluid when tapping Aluminum. Get one specifically for Aluminum, as cast Aluminum will gall easily if you don't.
|
|
Ken Harris
Grand Potentate Joined: 12/January/2006 Location: Canada Status: Offline Points: 1120 |
Post Options
Thanks(0)
|
Wow- a post from Chuck that actually helps someone! Will wonders ever cease? Good going Chuck. I knew you could do it if you put your mind to it.
|
|
Inventor of Teflon Carpet Wand Glides.Free Glides for all Cleaners in June!
|
|
Dennis Conner
SGK Basher Joined: 11/October/2004 Status: Offline Points: 640 |
Post Options
Thanks(0)
|
my other posts have helped others too..
Helped them from getting ripped off by your crooked ass!
|
|
Ken Harris
Grand Potentate Joined: 12/January/2006 Location: Canada Status: Offline Points: 1120 |
Post Options
Thanks(0)
|
Sure Chuck. That must be why my sales so far this year are running over 400% up from last year, year to date. Face it, big guy, all you suceeded in doing these last 3 years is raising the public awareness and curiosity in me. Edited by Ken Harris - 08/April/2007 at 12:30pm |
|
Inventor of Teflon Carpet Wand Glides.Free Glides for all Cleaners in June!
|
|
LilNiteRidrhood
Master Carpet Cleaner Joined: 17/March/2004 Location: Antarctica Status: Offline Points: 1257 |
Post Options
Thanks(0)
|
Oh brother
|
|
Post Reply | Page 12> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Welcome to KleenKuip.com's Professional Carpet Cleaners Discussion Forum!