High Power Portable VS Truckmount Operating costs. |
Post Reply | Page <1 45678> |
Author | |
Superglide Ken
Grand Potentate SGK Joined: 17/March/2004 Location: Canada Status: Offline Points: 4868 |
Post Options
Thanks(0)
|
Wrong again, but what would I expect to hear from a guy that has never seen my machine? The machine I use has a 2" stack, not a 1.5" as you have stated here. 2" has flow capacity of 500 cfms. That is more than enough to handle the 300 to 400 cfm of airflow my machines need to breath even under maximum flow. Don't forget that under actual cleaning load, airflow falls to under 200 cfms, just like it does for all PD units as well, so the 2" diameter stack is more than adequate to do the job. |
|
Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs.
|
|
Sponsored Links | |
cmaster
IICRC Instigator Joined: 29/January/2004 Location: Canada Status: Offline Points: 29693 |
Post Options
Thanks(0)
|
Ummmmm no one has ever seen that machine cuz it only exists in your warped mind
|
|
The STD Meter |
|
FriendlyHammer
Master Carpet Cleaner Joined: 08/July/2007 Location: United States Status: Offline Points: 1383 |
Post Options
Thanks(0)
|
Then post a picture of the front of it. We'll see.
|
|
Superglide Ken
Grand Potentate SGK Joined: 17/March/2004 Location: Canada Status: Offline Points: 4868 |
Post Options
Thanks(0)
|
It is a clone of the Scandia machine, except the stack was changed to 2" rather than the 1.5" they used on their shell.
|
|
Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs.
|
|
cmaster
IICRC Instigator Joined: 29/January/2004 Location: Canada Status: Offline Points: 29693 |
Post Options
Thanks(0)
|
Pictures??????????? No Photoshop
|
|
The STD Meter |
|
Superglide Ken
Grand Potentate SGK Joined: 17/March/2004 Location: Canada Status: Offline Points: 4868 |
Post Options
Thanks(0)
|
See them in September at Connections. We are making these machines in several shells. The Sandia type machine is only one of the ones we use. We make them in the 1005DX body style too for those that like that shape better. 4 different body shells be used and sold.
|
|
Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs.
|
|
cmaster
IICRC Instigator Joined: 29/January/2004 Location: Canada Status: Offline Points: 29693 |
Post Options
Thanks(0)
|
If you're selling them now, why not take a picture and post it here. We need to see all your special mods
|
|
The STD Meter |
|
Superglide Ken
Grand Potentate SGK Joined: 17/March/2004 Location: Canada Status: Offline Points: 4868 |
Post Options
Thanks(0)
|
Except for the Ultra Ninja, these machines are being sold only to the 2500 Cleaner's Club members. Because I do not allow them to talk about or post pictures of their machines, it would not be a thing I will do either. Except for the picture shown on my site, the detailed pictures of these machines will only be released when this machine goes to Connections in September.
The good news is, there is only 6 months to go before that happens. Everyone will see the special mods at that time. We still will not be selling the 3 or 4 vacuum models in canada though.There is a special canada model coming out after that though, so Canadians will be able to own a Titan too. |
|
Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs.
|
|
cmaster
IICRC Instigator Joined: 29/January/2004 Location: Canada Status: Offline Points: 29693 |
Post Options
Thanks(0)
|
Ahhhhhhhh. So it is more bullsh*t. Just as I suspected. Good try though
|
|
The STD Meter |
|
Superglide Ken
Grand Potentate SGK Joined: 17/March/2004 Location: Canada Status: Offline Points: 4868 |
Post Options
Thanks(0)
|
You are welcome.
|
|
Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs.
|
|
cmaster
IICRC Instigator Joined: 29/January/2004 Location: Canada Status: Offline Points: 29693 |
Post Options
Thanks(0)
|
Better save this cuz we know you're gonna change it
|
|
The STD Meter |
|
FriendlyHammer
Master Carpet Cleaner Joined: 08/July/2007 Location: United States Status: Offline Points: 1383 |
Post Options
Thanks(0)
|
Bull! There's no reason the the world why you can't post a picture of the hose connect on the outside, with the ouside of the machine exposed. Unless, of course, you're telling another lie.
|
|
FriendlyHammer
Master Carpet Cleaner Joined: 08/July/2007 Location: United States Status: Offline Points: 1383 |
Post Options
Thanks(0)
|
Yep. I saved the one that said his machine will have 160" of waterlift with the 3-stage vacs in series. Funny thing is, he also claimed they have 150" when not in series. That means that putting two of them back to back only adds 10" of waterlift.
He's smokin' some wacky tobacy. Edited by FriendlyHammer - 18/March/2008 at 10:59pm |
|
cmaster
IICRC Instigator Joined: 29/January/2004 Location: Canada Status: Offline Points: 29693 |
Post Options
Thanks(0)
|
Sworn to secrecy. Klepto Kenadian Kenny's Karpet Kleaning Kult of Krackheads
|
|
The STD Meter |
|
Post Reply | Page <1 45678> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Welcome to KleenKuip.com's Professional Carpet Cleaners Discussion Forum!