Air movers on carpet jobs?
Printed From: Carpet Cleaning Forum
Category: Carpet Cleaners Discussion
Forum Name: Carpet Cleaners Hangout
Forum Description: General discussion on anything related to carpet cleaning
URL: https://www.kleenkuip.com/forum/forum_posts.asp?TID=1888
Printed Date: 29/April/2024 at 9:43am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: Air movers on carpet jobs?
Posted By: Advantage
Subject: Air movers on carpet jobs?
Date Posted: 18/August/2005 at 11:57pm
|
Do use air movers to speed drying on carpet jobs? If you do, how many do you use? Do you leave them and pick them up later, or just take them when you leave? Do you advertise their use in your literature? Seems like a lot of work to me. They eat up a lot of space in my van. What are your opinions? ------------- CCT, UFT, OCT, CRT, RRT, WRT, SMT, FSRT, JTC, JSR, JWR, MTC a great life, if you don't weaken. |
Replies:
Posted By: Dennis Conner
Date Posted: 19/August/2005 at 12:04am
|
With my high heat machine, greenglide, the dry summers, solvent protector, and an air mover, I have very fast dry times.
I use them often, usually two at a time. I move them out the house as I clean...a room at a time. I don't get it completely dry, but a little bit goes a LONG way in reducind dry times. I take them with me.
My opinions...ken is a liar and jarwad DePOG is an idiot!
|
Posted By: John L
Date Posted: 03/September/2005 at 10:56pm
|
I use my turbo-fan to keep me cool.... |
Posted By: cmaster
Date Posted: 03/September/2005 at 11:56pm
|
I only use air movers if there is an obvious potential for wicking |
Posted By: Adwa
Date Posted: 04/September/2005 at 7:25am
I use air movers as an alternative to Air Conditioning  ------------- The Following Statements do not Necessarily Reflect the Views of this Forum Network http://www.kleenkuip.com - http://www.kleenkuip.com |
Posted By: doug
Date Posted: 04/September/2005 at 9:03am
Use a glide. A hole glide. If dryng is that big a problem pad it. ------------- Just My opinion |
Posted By: John L
Date Posted: 04/September/2005 at 1:06pm
| Less than 1hr on nylon and less than 30min on comm. grade... without airmovers...It's wanding technique.... |
Posted By: Advantage
Date Posted: 04/September/2005 at 7:31pm
|
My drying tmes are not that big of a problem, although I am ready to learn anything to help. As with a lot of things it's perception. I want to give the customer the highest level of service. If that means bringing in airmovers, then I'm there. ------------- CCT, UFT, OCT, CRT, RRT, WRT, SMT, FSRT, JTC, JSR, JWR, MTC a great life, if you don't weaken. |
Posted By: John L
Date Posted: 04/September/2005 at 10:06pm
| what are you using for equiptment???? |
Posted By: Adwa
Date Posted: 06/September/2005 at 11:11pm
|
Advantage...........good question.........what are you using for equipment???? ------------- The Following Statements do not Necessarily Reflect the Views of this Forum Network http://www.kleenkuip.com - http://www.kleenkuip.com |
Posted By: Advantage
Date Posted: 07/September/2005 at 9:33pm
|
Bridgepoint Saber 2000, 18hp (Prochem Blazer) Normally the RotoVac, If its really bad I use the RX-20. Since I started this post I've been taking at least one in on every job. The first room I do is pretty much dry by the time I leave. ------------- CCT, UFT, OCT, CRT, RRT, WRT, SMT, FSRT, JTC, JSR, JWR, MTC a great life, if you don't weaken. |
Posted By: cmaster
Date Posted: 07/September/2005 at 10:11pm
Good idea. Another great selling feature
|
Posted By: doug
Date Posted: 08/September/2005 at 4:21pm
How long before you leave? ------------- Just My opinion |
Advantage wrote:
Posted By: Advantage
Date Posted: 08/September/2005 at 7:55pm
|
You handing me my hat Doug? ------------- CCT, UFT, OCT, CRT, RRT, WRT, SMT, FSRT, JTC, JSR, JWR, MTC a great life, if you don't weaken. |
Posted By: cmaster
Date Posted: 08/September/2005 at 8:39pm
|
And your coat. See ya
|
Posted By: Adwa
Date Posted: 08/September/2005 at 10:44pm
Be nice Cmaster.............. ------------- The Following Statements do not Necessarily Reflect the Views of this Forum Network http://www.kleenkuip.com - http://www.kleenkuip.com |
Posted By: cmaster
Date Posted: 08/September/2005 at 11:21pm
|
I'm kidding. Take it easy
|
Posted By: doug
Date Posted: 09/September/2005 at 8:48am
|
Take it easy I've been running down the road tring to losen my load I got 7 jobs on my mind Four that want to kill me Two that want to bill me And one that says she's a friend of mine Take it easy, take it easy Don't let the sound of your Truckmount drive you crazy. ------------- Just My opinion |
Posted By: cmaster
Date Posted: 09/September/2005 at 5:20pm
|
Good one
|
Posted By: John L
Date Posted: 09/September/2005 at 5:39pm
| .. |
Posted By: Superglide Ken
Date Posted: 09/September/2005 at 7:11pm
|
I agree. ------------- Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs. |