Print Page | Close Window

Single or Double Bend?

Printed From: Carpet Cleaning Forum
Category: Carpet Cleaners Discussion
Forum Name: Carpet Cleaners Hangout
Forum Description: General discussion on anything related to carpet cleaning
URL: https://www.kleenkuip.com/forum/forum_posts.asp?TID=3027
Printed Date: 24/August/2025 at 12:57pm
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: Single or Double Bend?
Posted By: dennis_is_ok
Subject: Single or Double Bend?
Date Posted: 26/October/2006 at 9:03pm
wouldnt single bend be better for maximum recovery?



Replies:
Posted By: Hammy
Date Posted: 26/October/2006 at 10:14pm
Why would you want to clean with a single bend?

-------------
Could somebody just clean my carpets!


Posted By: dennis_is_ok
Date Posted: 27/October/2006 at 12:12am
I use a ninja, I have to worry about recovery.


Posted By: Superglide Ken
Date Posted: 27/October/2006 at 5:35am
No. The ability of a wand to recover water is dependant on the wandhead and lip design, not wether there is 1 bend or 2 in it.
    

-------------
Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs.


Posted By: Ed Valentine
Date Posted: 27/October/2006 at 8:25am
Dennis;
 
If you are worried about recovery, try a single jet wand. It will allow greater impact; less volume of water, which may solve your problem.
 
Single or double bend wands can be debated.
 
Good Fortune;
Ed Valentine
cross-american corp.


Posted By: Steamy
Date Posted: 27/October/2006 at 10:28am

I like double bend for its agility to get under the corners of beds, desk, etc.



-------------
It could always be worse. I mean you could be some carpet stain being emulsified by pre-spray all the while watching a wand spraying really hot solution aiming stright for you.


Posted By: dennis_is_ok
Date Posted: 27/October/2006 at 2:32pm
I don't do houses
 
Originally posted by Steamy Steamy wrote:

I like double bend for its agility to get under the corners of beds, desk, etc.



Posted By: thermedix
Date Posted: 27/October/2006 at 5:26pm

IMO, single bend are very uncomfortable, can`t beat an S bend, stainless.

I have a Ninja as back up and use my 2 jet Cleanco wand on it, works great..


-------------
It`s not how far you fall...it`s how high you bounce back up...


Posted By: Hammy
Date Posted: 27/October/2006 at 9:46pm
There are many ways to improve recovery from a portable. Using a single bend would not even be on my list! Downer

-------------
Could somebody just clean my carpets!


Posted By: dennis_is_ok
Date Posted: 27/October/2006 at 10:12pm
thanks for sharing your idea but, your list looks pretty short
 
 
Originally posted by Hammy Hammy wrote:

There are many ways to improve recovery from a portable. Using a single bend would not even be on my list! Downer


Posted By: Hammy
Date Posted: 27/October/2006 at 10:55pm
Here's an idea: buy some pvc pipe, stick with your single bend wand and you should be good to go! Not sure how your going to make those corners though. Tongue Your recovery should improve. Let me know how you make out.Tongue Oh Ya! I almost forgot, remember to clean your filter. Tongue

-------------
Could somebody just clean my carpets!


Posted By: nightrider
Date Posted: 28/October/2006 at 12:06am
Dennis_is_Gay.........why don't you just suck on a PVC Pipe and make sure you get all that Goo in your mouth ......just the way you like it Tounge You can have all the recovery you like.
 
What a stupid question from someone that calls himself a Pro...........Single....or......Double Bend........Do you mean on 1 knee or 2 knees Tounge  Butt Shake Is that what you mean JOHN  ( Dennis_is_Gay )
 
                                              Nightrider


Posted By: dennis_is_ok
Date Posted: 28/October/2006 at 12:49am
Jack
your game is very weak old man!


Posted By: nightrider
Date Posted: 28/October/2006 at 1:02am
I DON'T HAVE A GAME.............I LOOK AT WHAT REALITY HAS TO OFFER AND JUST HAVE AN OPPOSITE REACTION TO THE ACTION
 
WHEN THEY SAY " THIS IS A MANS WORLD " DON'T TAKE IT SO LITERAL...........THERE ARE WOMAN WALKING THE EARTH AS WELL, JUMP THE FENCE.......SEE WHAT IT'S LIKE
 
                                          NIGHTRIDER


Posted By: CAN_AM
Date Posted: 28/October/2006 at 1:10am

John, dennis_is_gay, i always thought you were gay. NR thanks for the heads up



Posted By: MR. STEAMER
Date Posted: 28/October/2006 at 11:19am
NR has lost it......never seen him so abusive

-------------
www.mr-steamer.com


Posted By: nightrider
Date Posted: 28/October/2006 at 4:46pm
It's called................." Lack of Nookie " LOL.........but I keep getting offers from gay guys like John or Don ..............
 
                                             Nightrider


Posted By: doug
Date Posted: 28/October/2006 at 4:47pm
WOW?? I am not getting involved with this thread??

-------------
Just My opinion


Posted By: dennis_is_ok
Date Posted: 28/October/2006 at 4:55pm
lack of old man's medication.


Posted By: nightrider
Date Posted: 28/October/2006 at 5:08pm
Hold that thought John................I HAVE TO POP A FEW PILLS Drunky
 
                                            NIGHTRIDER


Posted By: Hammy
Date Posted: 28/October/2006 at 8:06pm
Are they blue by any chance ?  Big smile

-------------
Could somebody just clean my carpets!


Posted By: nightrider
Date Posted: 28/October/2006 at 8:17pm
Some Blue............some Green...........some Pink
 
Bl = 20mg......Gr = 10mg..........Pk = 5mg
 
                                        Nightrider


Posted By: dennis_is_ok
Date Posted: 28/October/2006 at 8:26pm
who the hell is john anyway?


Posted By: Hammy
Date Posted: 28/October/2006 at 8:33pm
The gay guy.Tongue

-------------
Could somebody just clean my carpets!


Posted By: carpetologist
Date Posted: 28/October/2006 at 10:58pm
Anyone can build a carpet cleaning machine.
 
Now a wand is a challenge. Years ago someone made a simple squirt & suck wand and everyone copied it and lowered their price. Very few have ever really studied the aerodynamics that would or could be necessary to offer max CFM and water lift without restrictions. Even a weld burr on the inside of a wand can create restriction and lead to inneficiencies. The only real change that any one made was going to a double-bend to allow it to be made agile and get to areas that the straight-shank can't get to. Of course, we can't discount the fact that Kenny has made virtually all wands to glide better for us saving our bones and energy for more pleaureable activities.
 
P.S.
For more effective and efficient wands and tools look at http://www.kleenkuip.com/wands_and_hand_tools/cfr_carpetCleaningTools.htm - CFR and Power Flite and you will understand what I mean about more effectiveness through aerodynamics. But, be prepared to shell out a few more $$$.
 


-------------
Kleen Kuip Supply Mart Inc.

http://www.kleenkuip.com - New & Used Professional Carpet Cleaning Machines, Restoration Equipment, Training, Service and Supplies


Posted By: nightrider
Date Posted: 30/October/2006 at 12:38am
I can't build a carpet cleaning machine...................
 
                                      Nightrider


Posted By: Superglide Ken
Date Posted: 30/October/2006 at 11:36am
That is only because you have not tried Jack. You are definatly smart enough to do it if you put your mind and dollars to it..................

-------------
Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs.


Posted By: doug
Date Posted: 30/October/2006 at 2:01pm
Thats the problem he lost his mind???

-------------
Just My opinion


Posted By: nightrider
Date Posted: 30/October/2006 at 2:21pm
No...That's not it Doug...........I think it's the dollars.............But it could be both.......No Brain + No Dollars = No Carpet Cleaning Machine.
 
Unless Kenny helps me.........Then we have a Carpet Machine & Visa Problems LOL 
                                           Nightrider


Posted By: Superglide Ken
Date Posted: 30/October/2006 at 3:36pm
No Jack, then all we have is sales problems if we try to sell it. Manufacturing of TMs is not a hard business. It is the selling of them that is. A lot of competition. I would rather keep fighting with HR over the glides than get into that business. If you have a spare million or 2 with nothing else to do with, I will give it a try though. lol

-------------
Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs.


Posted By: MR. STEAMER
Date Posted: 30/October/2006 at 5:27pm
build it for as much as a portable and they will come!

-------------
www.mr-steamer.com


Posted By: nightrider
Date Posted: 30/October/2006 at 8:02pm
ALRIGHT KENNY...........LET ME SEE.......A SPARE MILLION OR TWO.......UMMMMMMMMMM...........NOPE............SORRY,     NOT EVEN IN MONOPOLY MONEY...........LOL
 
                                          NIGHTRIDER


Posted By: MR. STEAMER
Date Posted: 30/October/2006 at 8:40pm
he'll take NR bonus bucks

-------------
www.mr-steamer.com


Posted By: doug
Date Posted: 31/October/2006 at 1:32pm
Check your fortune KOOKIE??

-------------
Just My opinion


Posted By: nightrider
Date Posted: 31/October/2006 at 4:01pm
All my fortune cookies are rigged at the restaurant.................7/10 say " Go Buy Another Cookie For Your Fortune "
 
                                              Nightrider



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net