How many identities do YOU have on the KK board???
Printed From: Carpet Cleaning Forum
Category: Carpet Cleaners Discussion
Forum Name: Carpet Cleaners Hangout
Forum Description: General discussion on anything related to carpet cleaning
URL: https://www.kleenkuip.com/forum/forum_posts.asp?TID=3128
Printed Date: 17/August/2025 at 1:42pm
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: How many identities do YOU have on the KK board???
Posted By: Superglide Ken
Subject: How many identities do YOU have on the KK board???
Date Posted: 15/November/2006 at 5:38pm
|
I will admit to having a total of 3. Only using the Superglide handle currently.I know of another poster here that has more than 6 identities in total that he has used. What about the rest of you?
------------- Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs. |
Replies:
Posted By: nightrider
Date Posted: 15/November/2006 at 6:06pm
|
YOU'LL NEVER KNOW...........I CAN BE ANYONE........OR TWO........OR THREE..........OR EVEN 10........MAYBE EVEN 20
KENNY...........WHY DON'T YOU GET ONE OF YOUR OTHER IDENTITIES TO ANSWER THE QUESTION OF HOT WATER VS COLD
 ....MAYBE THEY KNOW BETTER NIGHTRIDER
|
Posted By: jtuseo
Date Posted: 15/November/2006 at 6:09pm
|
I only have one. With it I rock out with my *ock out! ------------- WWW.PREFERREDCARPETCLEANING.COM |
Posted By: Superglide Ken
Date Posted: 15/November/2006 at 6:24pm
|
KENNY...........WHY DON'T YOU GET ONE OF YOUR OTHER IDENTITIES TO ANSWER THE QUESTION OF HOT WATER VS COLD ....MAYBE THEY KNOW BETTER
No need for that Jack, as I answered it myself, quite easily. I was too tired last night. Go check under the wand thread. I wrapped it up nice and neat for you this time.  ------------- Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs. |
Posted By: Superglide Ken
Date Posted: 15/November/2006 at 8:31pm
|
No body else going to admit to more than 1 identity. I know that quite a few do, by I guess these people want to stay under cover? ------------- Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs. |
Posted By: cmaster
Date Posted: 15/November/2006 at 8:34pm
I have 2, only post under 1 for now 
|
Posted By: doug
Date Posted: 15/November/2006 at 9:32pm
|
I'am still searching for my true identity? ------------- Just My opinion |
Posted By: Hammy
Date Posted: 15/November/2006 at 9:55pm
Who the F*#k is who?? ------------- Could somebody just clean my carpets! |
Posted By: cmaster
Date Posted: 15/November/2006 at 10:40pm
|
Wouldn't you like to know?
|
Posted By: nightrider
Date Posted: 15/November/2006 at 10:48pm
|
KENNY JUST WANTS TO MAKE SURE THAT HE DOESN'T DOUBLE SELL A CLIENT...
NIGHTRIDER
|
Posted By: doug
Date Posted: 16/November/2006 at 11:51am
|
Then that would be a double noship? ------------- Just My opinion |
Posted By: cmaster
Date Posted: 16/November/2006 at 1:00pm
|
doug wrote:Posted By: Ed Valentine
Date Posted: 16/November/2006 at 2:39pm
|
Personally, I like to know who I shake hands with. Fake names can also represent fake people (w/o integrity),..with a few exceptions ofcourse, as on this particular board.
Just MHO.
Good Fortune to all;
"Name Held by Request"
hee---heee-hee
|
Posted By: Superglide Ken
Date Posted: 16/November/2006 at 3:10pm
|
Ed: I have to agree with you.With a few exceptions of course, as you noted. My other signitures were pretty obvious(Ken Harris, Teflondonster)so there was little doubt who was doing the posting.Some people of course hide behind a fake name that gives no clue as to who they really are and make malicious comments attacking other people's and companies integrity. Most will agree that this is wrong.Fun is fun, and I like it as much as the next guy, but it can be taken too far. Aninimity tends to encourage that. ------------- Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs. |
Posted By: doug
Date Posted: 16/November/2006 at 4:37pm
|
SGK quit kissing Mr. Valentine's ass to try and stay on the good side of him so when you screwup he will go a bit lighter on you?? ------------- Just My opinion |
Posted By: splash_$$$_dash
Date Posted: 16/November/2006 at 4:39pm
| at one time I had 4 but now cant recall the names or e-mails LOL |
Posted By: Superglide Ken
Date Posted: 16/November/2006 at 5:51pm
If I agree with Ed, it is because I agree with Ed, and nothing more. Ed will be the first to point out in the past that when I didn't agree with Ed on some subject, I was anything BUT kissing his ass. Right Ed? Doug, you were around when that happened, so you should know better than to make that statement. BTW, my lips can be bought; but they don't come cheap! If you want them they are going to cost you a lot of money. How much you got? ------------- Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs. |
Posted By: doug
Date Posted: 16/November/2006 at 7:12pm
|
I tried your lips they kept falling off. I was not impressed with them. Now your glides that is a different story? ------------- Just My opinion |
Posted By: Superglide Ken
Date Posted: 16/November/2006 at 7:35pm
|
I tried your lips they kept falling off. I was not impressed with them.
The early lip glides did not fit the Prochem wands well last year, because they have larger lips than other wands. The ones I make now are cut different and fit much better, but still not as well as a Superglide does? ------------- Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs. |
Posted By: cmaster
Date Posted: 16/November/2006 at 10:13pm
One of my glides falls off, too. My other one broke in a week 
|
Posted By: Superglide Ken
Date Posted: 16/November/2006 at 10:20pm
|
Well, stop dropping them Paul. ------------- Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs. |
Posted By: cmaster
Date Posted: 16/November/2006 at 10:54pm
|
Dropping them? They never fit from the get go. Musta been seconds. Hmmmmmm.................... Who would sell sub standard glides?
|
Posted By: Superglide Ken
Date Posted: 17/November/2006 at 4:33am
|
Not I. ------------- Inventor of the Teflon Wand Glide and the Turboteck Rotary Air Duct Cleaners for TMs. |
Posted By: cmaster
Date Posted: 17/November/2006 at 9:37am
Riiiiiiight 
|
Posted By: doug
Date Posted: 17/November/2006 at 11:25am
does teflon break?? ------------- Just My opinion |
Posted By: cmaster
Date Posted: 17/November/2006 at 11:57am
The edge that snaps onto the ss lips at the back, broke. Piss poor design on that one 
|
Posted By: Hammy
Date Posted: 17/November/2006 at 2:21pm
Minor details ------------- Could somebody just clean my carpets! |
Posted By: doug
Date Posted: 17/November/2006 at 2:31pm
|
Must be a poorly designed wand?? ------------- Just My opinion |
Posted By: Hammy
Date Posted: 17/November/2006 at 2:47pm
That's what I was thinking ------------- Could somebody just clean my carpets! |
Posted By: cmaster
Date Posted: 17/November/2006 at 3:45pm
|
Doug and Hammy must be SGK lovers
|
Posted By: Hammy
Date Posted: 17/November/2006 at 3:47pm
|
Can you feel the love?? ------------- Could somebody just clean my carpets! |