Print Page | Close Window

Wicking & Humidity

Printed From: Carpet Cleaning Forum
Category: Carpet Cleaners Discussion
Forum Name: Carpet Cleaners Hangout
Forum Description: General discussion on anything related to carpet cleaning
URL: https://www.kleenkuip.com/forum/forum_posts.asp?TID=4235
Printed Date: 16/June/2024 at 3:44pm
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: Wicking & Humidity
Posted By: David Scher
Subject: Wicking & Humidity
Date Posted: 28/September/2007 at 10:07am
I am trying to find out whether the relative humidity in a room will cause wicking of a dormant spot. If I have cleaned a spot (presumably a tannin spill), and I am able to dry it completely without wicking, can wicking occur in the future if the relative humidity rises in the future? If so, what % of relative humidity would the room need to get to for wicking to occur?



Replies:
Posted By: cmaster
Date Posted: 28/September/2007 at 10:33am
Yes. It's happened to us(usually in August) on commercial glue down. Not sure what the RH was though

-------------

The STD Meter


Posted By: doug
Date Posted: 28/September/2007 at 11:33am
100% you need to get rid of some realitives? The floor would have to be sweating for that to happen?

-------------
Just My opinion


Posted By: Jeff Van Buren
Date Posted: 28/September/2007 at 12:58pm
    flush it and waterclaw it


Posted By: cmaster
Date Posted: 28/September/2007 at 1:34pm
Powerbond is the worst for wickbacks. As an experiment, I had one of my techs flush a 20 x 20 area for 5 hours with a Steamin Demon and dry it with fans. The water was still coming out brown and it still wicked dirt
    

-------------

The STD Meter


Posted By: doug
Date Posted: 28/September/2007 at 3:53pm
Originally posted by Jeff Van Buren Jeff Van Buren wrote:

     flush it and waterclaw it

    water claw on a direct glue down??????????????

-------------
Just My opinion


Posted By: Jeff Van Buren
Date Posted: 28/September/2007 at 8:04pm
    He did not specify CGD Cmaster mentioned CGD


Posted By: David Scher
Date Posted: 01/October/2007 at 10:56am
    Thanks for all the feedback!!


Posted By: carpetologist
Date Posted: 01/October/2007 at 5:50pm
Some spots that have been over-worked on with different chemicals tend to fool you and look like they come back but infact the residue left from the overworked chemical is actually attracting new soil to the same area making your customer think the stain has returned.

You should also pluck a fiber from the carpet in question and put it into a glass of water. If it floats it is Olefin and Olefin wants to wick-up rapidly regardless of humidity.
    

-------------
Kleen Kuip Supply Mart Inc.

http://www.kleenkuip.com - New & Used Professional Carpet Cleaning Machines, Restoration Equipment, Training, Service and Supplies


Posted By: doug
Date Posted: 01/October/2007 at 8:29pm
If there is enough cleaner on it it will break the surface tension of the water and sink?

-------------
Just My opinion


Posted By: cmaster
Date Posted: 02/October/2007 at 1:14am
As long as it disappears. Right?

-------------

The STD Meter


Posted By: doug
Date Posted: 02/October/2007 at 7:39am
just use a tuft from another part of the room

-------------
Just My opinion


Posted By: MR. STEAMER
Date Posted: 02/October/2007 at 8:41am
Pink Solution

-------------
www.mr-steamer.com


Posted By: cmaster
Date Posted: 02/October/2007 at 10:36am
Originally posted by MR. STEAMER MR. STEAMER wrote:

Pink Solution


Are you hooked on that stuff or what?
     

-------------

The STD Meter


Posted By: doug
Date Posted: 02/October/2007 at 2:43pm
he uses it at a 50:1 ratio to clean

-------------
Just My opinion


Posted By: Just Ol' Willy
Date Posted: 02/October/2007 at 4:19pm
Geeeez- Run a bonnet over it . Prespray, make sure your LOW PROFILE bonnet , is moist on a 175 rpm  and problem usually solved. I've used Host powder with great success on repeating stains.

Posted wrong pic on sig....


-------------


Posted By: papagator
Date Posted: 11/October/2007 at 4:19pm
Here's a nightmare for ya CMaster...I have 110,000 sq.ft of powerbond in our long term care facility and every Aug. it looks like I don't do my job!! And Willy...you are correct as well...the only way I can make the place look half way decent is to encap in the summer.

-------------
just swimmin in circles


Posted By: cmaster
Date Posted: 11/October/2007 at 10:22pm
Unfortunately for you, the carpet will ugly out long before it wears out

-------------

The STD Meter



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net