NINJA TO A BOOSTER AND BACK
Printed From: Carpet Cleaning Forum
Category: Carpet Cleaners Discussion
Forum Name: Portable Carpet Steam Cleaning Machines
Forum Description: Discuss anything relating to portable carpet cleaning machines
URL: https://www.kleenkuip.com/forum/forum_posts.asp?TID=5471
Printed Date: 15/May/2024 at 5:00am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: NINJA TO A BOOSTER AND BACK
Posted By: rhawkins
Subject: NINJA TO A BOOSTER AND BACK
Date Posted: 20/November/2008 at 7:24pm
|
I MADE A VAC BOOSTER FROM MY NINJA BY INSERTING A PVC PIPE DOWN THE MIDDLE OF THE LID TO WITHIN 1/2 INCH FROM BOTTOM OF THE TANK. I PUT IN A CHECK VALVE IN THE TOP OF THE PIPE SO WATER CANNOT FLOW BACK IN AS WELL WHEN NOT USING AS A BOOSTER IT OPERATES AS A CARPET/UPHOLSTERY MACHINE AGAIN BECAUSE CHECK VALVE NOW CLOSES WHEN USED AS SUCH. ALSO YOU NEED TO PUT IN ANOTHER CHECK VALVE AT A STRATEGIC POINT IN ORDER FOR THE SYSTEM TO BE BALANCED THAT IT WILL ALLOW THE AIR TO BE PULLED IN THE RIGHT DIRECTION WHEN THE WAND IS LOCKED DOWN ON THE FLOOR.. IT SURE WORKS GOOD WHEN I HAVE IT CONNECTED TO MY RECOIL. MORAL OF THE STORY....... IT IS EASIER TO GET EDS BOOSTER BUT WHEN YOU LIVE IN THE NORTHERN CANADA......... SHIPPING AND DUTY AND DOLLAR DIFFERENCE REALLY KILLS US EH? WISH CANADA HAD BETTER SUPPLIERS OR WHY ED CAN GO TO ENGLAND TO SET UP SHOP BUT NOT CANADA. SORRY ED JUST A LITTLE JEALOUS.LOL ------------- redhot |
Replies:
Posted By: John L
Date Posted: 20/November/2008 at 8:09pm
| If I'm correct Ed has a Great Dealer over in EU.. World of Clean..? |
Posted By: Ed Valentine
Date Posted: 21/November/2008 at 8:44am
|
Well, in answer to your question, John L is our Company Ambassador who travels the World cleaning every corner on this planet. He loved Tea & Crumpets so much that he set up our European distribution at a modern plant in the UK.
John spins in his over-stuffed leather back chair all day with a smile on his face!!!!
The very best to all;
Ed Valentine
|
Posted By: John L
Date Posted: 21/November/2008 at 10:36am
|