orfice (too hot)
Printed From: Carpet Cleaning Forum
Category: Carpet Cleaners Discussion
Forum Name: Truck Mount Carpet Steam Cleaning Machines & Equipment
Forum Description: Discuss anything relating to truckmounts
URL: https://www.kleenkuip.com/forum/forum_posts.asp?TID=6262
Printed Date: 03/May/2024 at 5:24am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com
Topic: orfice (too hot)
Posted By: 77748
Subject: orfice (too hot)
Date Posted: 08/November/2009 at 8:52pm
|
Prochem legend SE mancine gets too hot quick got too keep working to drop the temerature. If I change the orifice it will run approx 190 to 200 continuos. I like the heat I run the PSI about 325 lower the higher the temperature gets. Question is what is the downfall of not changing the orifice?  |
Replies:
Posted By: doug
Date Posted: 08/November/2009 at 9:50pm
|
sounds more like it is not bypassing to cool itself down I would descale it first than see what the heat is like? ------------- Just My opinion |
Posted By: 77748
Date Posted: 09/November/2009 at 1:10am
| When I finish a job and turn the manual temperature bypass valve down the temperature drops down smoothly. |
Posted By: FuzzSucker
Date Posted: 09/November/2009 at 9:26pm
|
if you use a freshwater tank and a courtesy hose you can bypass a little into your freshwater tank, not a lot, just enough to drop your pressure by about 50psi. That will keep your temps more consistent.
------------- http://thepremierclean.com - http://thepremierclean.com | http://carpetcleaning-coloradosprings.com - Colorado Springs Carpet Cleaning |
Posted By: 77748
Date Posted: 09/November/2009 at 11:48pm
| Orifice is fine !! Going to just run it if anything there is a temperature dial have it on max will turn it down |