Print Page | Close Window

missing grout??

Printed From: Carpet & Floor Cleaning Industry Discussion
Category: Carpet Cleaners Discussion
Forum Name: Tile and Grout and Hard Surface Floor Cleaning Discussion
Forum Description: Discuss anything relating to hard surface flooring cleaning and maintenance
Printed Date: 30/November/2021 at 12:50pm
Software Version: Web Wiz Forums 12.01 -

Topic: missing grout??
Posted By: AndyMan
Subject: missing grout??
Date Posted: 20/July/2010 at 8:01pm
I was wondering if anyone has experienced any problems with damaging or loosening grout when cleaning ceramic tile.  I normally clean arount 600-700 psi with a t/m using a spinner. 


Posted By: Mark McMaster
Date Posted: 23/July/2010 at 1:29pm
Not too often. I usually do an inspection looking for cracked or missing/loose grout and inform the custy of the possibility of blowing out the grout.
 If so, let them know you can replace/repair the grout and then offer them a colour seal so the grout will  be a uniform colour.

Don't take your organs to heaven.....
Heaven knows we need them here -

Posted By: trole4us
Date Posted: 15/October/2010 at 7:46pm
Happen with old tile and poor installation. As Mark say's do 10 min inspection before starting the job you'll save a lot of headaches and at  the same time sale more with fixing there problem.

American Steamers - - Carpet Cleaning Miami | - Carpet Cleaners Fort Lauderdale

Posted By: westcovina
Date Posted: 30/January/2011 at 4:24pm
Yes. That happens all the time. You need to point it out to your customer and note it on your cleaning contract.

------------- -

Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 -
Copyright ©2001-2018 Web Wiz Ltd. -