Print Page | Close Window

Need part for Prochem legend - where to get?

Printed From: Carpet Cleaning Forum
Category: Carpet Cleaners Discussion
Forum Name: Truck Mount Carpet Steam Cleaning Machines & Equipment
Forum Description: Discuss anything relating to truckmounts
URL: https://www.kleenkuip.com/forum/forum_posts.asp?TID=7401
Printed Date: 28/March/2024 at 1:41am
Software Version: Web Wiz Forums 12.06 - https://www.webwizforums.com


Topic: Need part for Prochem legend - where to get?
Posted By: Dano33
Subject: Need part for Prochem legend - where to get?
Date Posted: 03/June/2012 at 10:56pm
I need to find/buy a sensor for my prochem legend se carpet machine. It's the 260 degree temperature sensor. I'm interested in buying new or used. Or getting anything that could replace it. I live on the big island, Hawaii.
Thanks for any help,
Daniel



Replies:
Posted By: Dano33
Date Posted: 03/June/2012 at 11:07pm
The old part number is 35-901039. The number has since changed to 86194270. I am unable to find the part anywhere to buy, so even references that may point me in the right direction would be very helpful.
Thanks again,
Daniel


Posted By: MR. STEAMER
Date Posted: 04/June/2012 at 12:08pm
the adjustment temperatue gauge  or the overheat sensor that opens the temp solenoid that lets water off into your waste tank to help cool the unit???

-------------
www.mr-steamer.com


Posted By: Dano33
Date Posted: 04/June/2012 at 5:06pm
This is the unit I need. I'm not sure which one it is, but it looks like this: 
http://intersupply.com/prods/pp35-901039_lg.jpg - PP35-901039 - SENSOR TEMP 260 DEGREE SWITCH
but I do know mine is broken and needs to be replaced. If you know what it's called or does, or any info about it, I would like to know. 
I'm not able to control the temperature on my machine. It either runs too cold or too hot, there's no control.


Posted By: Dano33
Date Posted: 04/June/2012 at 5:09pm
http://intersupply.com/prods/pp35-901039_lg.jpg - http://interlinksupply.com/prodimages/pp35-901039_lg.jpg
Here's a working link. Sorry.


Posted By: 77748
Date Posted: 25/July/2013 at 1:28am


Posted By: 77748
Date Posted: 25/July/2013 at 1:37am
So what happened my Prochem Legend has the same problem.
I referenced that part kind of inside the frame area little hard to get to . I am afraid it might rust off or snap. So I just did this
Replaced orifice, descaled unit,. Mother of all tms  when it comes to heat .Same prob.
Lay the wand down and man its overheated.
I run the bypass dial on the TM so that helps .
 I am working on a courtesy hose going back in the wand controlled by a valve
at the wand. .
Vacuum


Posted By: 77748
Date Posted: 25/July/2013 at 1:43am
I need a used Sutorbilt 4ML blower for this machine.
I am down. Carpet Cleaner Oh nooo. 

I have learned soo much . Do not neglect the blower and cat pump oils .


Posted By: 77748
Date Posted: 30/July/2013 at 1:46am
Found one 500. Thanks !



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.06 - https://www.webwizforums.com
Copyright ©2001-2023 Web Wiz Ltd. - https://www.webwiz.net