Kool-aid is not cool

Hammy wrote: Heat transfer on a car interior, your a brave man. Peroxide and amonia would do the same

What ratio do you use?

Roger wrote: Like somebody did say use red relive from pros choice for red stains and steam iron but be carefull . 1 spray red relive 2 cover white towel 3 use steam iron few sec at time  works very good .

Pro Choice's Red One is like magic.  Same process as Red Relive. 

I keep around the regular Pro Choice Red and use part A on yellow kool aid.

Koolaid is easy to take out if you got the system down pat.  Listen carefully.  Mix part A & B of Red relief (NOT RED 1) together.  Pour it into the stain and aggitate for a few seconds with a brush or your fingers.  Wet down a healthy thick wet clothe with cold water and put it over the stain after a standard wring out of the excess water.  Apply a hot iron on its hottest (hottest) setting with steam for 20-25 seconds.  Pull the iron off and let the clothe sit in place for 60 more seconds.  Do it again and again if you have to letting the carpet cool for a bit   between steamings.  Rinse out the clothe almost after each use.  The theory being the cool thick clothe saves the carpet while the super hot steam erases the stain.  YOU MUST GET THE IRON SUPER HOT!  Luke warm wimpy iron wont do much at all. Turn that iron up and wet that clothe.  No cheese baby.  I've never burnt the carpet yet.  25 seconds max though per melt down.  And dont leave you white clothe sopping wet, that dont work. 

I too say red relief! Works Period.

place a rug over it... :(

Assuming that the carpet is nylon, with kool aid stains, I extract as much of the kool aid as possible first. Next I pour an oxidizer onto the spot, place a terry cloth and hot iron on top. I let it sit for 20 seconds, let the carpet cool and repeat until it's completely gone. Get a liability release signed from the customer prior to doing this. There are no guarantees it'll come out.

What are talking about? doesn't sound like stain removal