HG EXTRA Cement & Grout Residue Remover
HG cement grout residue remover 1L (product 11) is a cement grout remover that removes cement residue from all types of porous and non-porous ceramic tiles and flagstones. But also from non-calciferous natural-stone types, such as Norwegian slate, granite and quartzite.
- For porous and non-porous ceramic tiles and flagstones
- Also suitable for non-calciferous natural-stone types, such as Norwegian slate
- Strengthens grout
- Removes cement residue haze
Frequently Asked Questions About HG EXTRA Cement & Grout Residue Remover
What is HG EXTRA Cement & Grout Residue Remover used for?
HG EXTRA Cement & Grout Residue Remover is a concentrated cleaning product designed to remove cement residue and grout haze from compatible tile and stone surfaces. It is particularly useful for cleaning up after tiling, grouting and renovation projects.
Does HG EXTRA Cement & Grout Residue Remover remove grout haze?
Yes. It helps remove the thin cement-based film left behind on suitable tiles after grouting. This cloudy residue, commonly called grout haze, can make newly installed floors look dull. Always follow the manufacturer’s application instructions.
What surfaces can HG EXTRA Cement & Grout Residue Remover be used on?
This product is intended for compatible, acid-resistant surfaces. Depending on the manufacturer’s instructions, these may include:
- Ceramic tiles
- Porcelain tiles
- Quarry tiles
- Certain acid-resistant natural stone surfaces
Always verify surface compatibility and test a small, inconspicuous area before cleaning.
Can I use HG EXTRA Cement & Grout Residue Remover on marble or limestone?
No. Do not use acidic cement residue removers on acid-sensitive materials such as marble, limestone or travertine unless the manufacturer specifically confirms compatibility. Acidic products can permanently etch or damage these surfaces.
How do I use HG EXTRA Cement & Grout Residue Remover?
For safe and effective application:
- Read the instructions on the product container.
- Confirm that the tile and grout are compatible with the cleaner.
- Allow newly installed grout to cure fully before cleaning.
- Dilute and apply the cleaner as directed by the manufacturer.
- Agitate the affected surface using an appropriate cleaning brush or pad.
- Rinse thoroughly with clean water and remove the residue.
Wear appropriate protective equipment, avoid incompatible surfaces and never mix cleaning chemicals.
Will HG EXTRA Cement & Grout Residue Remover damage existing grout?
Improper use of acidic cleaning products can damage some grout materials. Only apply this cleaner to compatible, fully cured grout surfaces, following the manufacturer’s instructions. Test first and rinse thoroughly after cleaning.
Can this product remove rust stains from tiles?
Some cement residue removers can help with certain mineral or rust deposits. However, effectiveness depends on the formulation and the surface. Check the product label to confirm whether rust removal is a supported application.
Is HG EXTRA Cement & Grout Residue Remover suitable for post-construction cleaning?
Yes. It can be useful for removing cement-based haze and residue from compatible tiled surfaces following installation and renovation work. Tile installers, professional cleaners and property maintenance contractors should confirm surface compatibility before use.
Where can I buy HG EXTRA Cement & Grout Residue Remover in Toronto?
Kleen Kuip Supply Mart supplies professional tile and grout cleaning products to homeowners, cleaning contractors and building maintenance professionals throughout Toronto and the Greater Toronto Area.
Call 416-429-0401 for current pricing and availability.
Visit Kleen Kuip Supply Mart Inc. at 23 Railside Road, Unit 2, North York, Toronto, Ontario.
Explore our complete selection of HG cleaning products for additional floor cleaning and maintenance solutions.